£6500 each
Product features PRE60
Custom made C-core transformer for very quiet power supply
Power supply capacitor bank is very large (43000uF)
Separate power supply for the analogue pre-amplifier stage and the media board
Four-layer board for very short signal paths and optimum grounding
Excellent 1% MELF resistors
Unbalanced input signal will be transformed to balanced
Discrete regulated power supply for the analogue stage
Selectable 6dB internal gain for High gain inputs
2 pair XLR output (Neutrik)
2 pair RCA output (Nextgen)
Switch mode power supply for ECO standby
Heavy duty chasses with 15mm front panel
Media board
Fully balanced DAC section using the Crystal DSD DAC (same as DAC30)
Improved Output buffer with FET output device (discrete)
Gold pin connection from media board to analogue pre-amplifier stage
Product specification PRE60
Analogue Inputs 2 pair XLR (L & R) 4 pair RCA (L & R)
Other In/outputs RS232, IR in/out, Trigger in/out, RF.
Input Impedance 15k Both RCA and XLR
Analogue Record Output 1 pair RCA (L & R)
Pre Output 2 pair RCA (L & R), 2 pair XLR (L & R)
Output Impedance 110 ohms
Frequency Response 20Hz – 100kHz -3dB
THD + N < 0.003%, 20Hz – 100kHz, 0dB gain.
Signal to Noise -115 dBV
Max in /out level 10Vrms
Gain 16dB
Power Consumption Standby: 0.5W; Operate: max 38W
Dimensions (WxDxH) 430 x 385 x 142mm
Product features A60
Fully balanced signal transmission
UFPD class D technology with 4 output models (2 for each channel) in balanced configuration.
Heavy Switch mode power supplies (2600VA peak)
Excellent 1% MELF resistors
Multi-layer Board (4) for very short signal paths, optimum grounding and best performance
Fully protected (In case of DC or overheating is indicated, the A60 will mute the loudspeaker output)
Custom made heat-sinks for best signal path and performance (direct mount on the PCB board)
High grade WBT nextgen Speaker connectors (two pairs)
High grade WBT nextgen RCA sockets
Neutrik XLR connections
Van Den Hul SCS12 Cable (for internal speaker connection)
Unbalanced input signal will be transformed to balanced
Discrete regulated power supply for the input stage
Heavy-duty chassis with aluminium front panel (15mm)
Integrated LOGO, standby/power button.
RS232, trigger in/out
Product specification A60
Output power:
2x250W 8 ohm (both channels driven), max 610W
2x500W 4 ohm (both channels driven), max 1230W
THD+N: < 0.02 %
Signal to Noise: 20-20kHz unweighted –105dBV
Gain: 26dB Unbalanced, 20dB balanced
Power Consumption Standby: 0.5W; Operate: max 32W
Dimensions (WxDxH) 430 x 385 x 142mm
