Power transformer: Premium quality, using OCC enameled copper wire and using M6 UI lamination, archiving losses lower than 0.05% on full power
Chock Transformers: Premium quality, using OCC enameled copper wire and amorphous C-core lamination. This specifically increases the speed of the power supply
Mono Design Amplifier
Bipolar Transistors from Toshiba
Output Stage Bias: Bias circuitry for constant bias operation
Protections: Short-circuit protected, Disconnected loudspeaker detected, Over-temperature of the heatsink, Over-temperature of the output transistors
Top of the line world class components
Special high frequency board
OCC copper solid core conductor for audio and PSU circuits
Mono design amplifier
2 power supplies (one for audio and one for PSU)
Solid State section uses one Power Transformer from the highest quality UI lamination (M6)
Tube section uses one Power Transformer and one Choke, from the highest quality lamination (M6)
No overall feedback
Class AB
Frequency response: 20Hz ～ 80kHz
Vacuum Tubes 6SN7 x2, EZ81 x2
Gain: 30 dB
Input/Impedance: RCA 1pair / 100KΩ, XLR 1pair / 100kΩ
Output Power: 1x 120W / 8Ω, 1x 200W / 4Ω, 1x 350W/2Ω
Power consumption: 300W
Dimensions: 440mm(W) 430mm(D) 200mm(H)
Weight: 40kg
