Saturday, March 3, 2012

Vertere Acoustics Pulse cables

 













Pulse Hand-built
€4000

Pulse hand-built utilises several internal conductors.

Pulse MicroLine
Pulse MicroLine conductor is Teflon coated with bespoke high purity copper strands plated in silver to a pre-defined thickness. New manufacturing methods were incorporated to handle the fragility of this critical conductor. The MicroLine strands, being a fraction of a human hair in thickness, create a challenge in the construction of the hand-built Pulse, limiting the overall length to a maximum of 2.0m. This conductor is only implemented in the hand-built Pulse cables.

Pulse HairLine
Pulse HairLine conductor is similar to the MicroLine, Teflon coated with over 3 times the number of bespoke high purity copper strands, plated in silver to half the thickness. The HairLine strands, also thinner than human hair, are designed with a ‘slow’ twist requiring special manufacturing techniques that ensure absolute quality and consistency.

Pulse ModeLine
Pulse ModeLine conductor, Teflon coated with several bespoke high purity copper strands is plated in silver to twice the thickness of the MicroLine. The ModeLine strands, with a ‘fast’ twist, are designed to assist wideband audio signal transmission through three main conduction layers. As per MicroLine and HairLine, there are both ‘hot’ and ‘cold’ conductors of ModeLine to ensure absolute signal quality.

Pulse EarthLine
Pulse EarthLine conductor, Teflon coated with multi stranded high purity copper strands, is plated in silver to 2/3 of the thickness of the MicroLine. The EarthLine defines an exact DC reference for all the alternating signals and in conjunction with the MicroLine, HairLine and ModeLine conductors provides maximum low level detail with remarkable dynamic range. Each and every hand-built Pulse cable is fully shielded with the necessary number and combination of internal conductors to a pre-specified twist and terminated with Vertere proprietary reference RCA or balanced XLR connectors.















Line Level Analogue Interconnect
The Line Level Pulse-R, conceived with the constant line-level signal in mind, is internally configured differently from the tonearm cable. It is designed to conduct complex, alternating, wideband and dynamic audio signals with absolute integrity. Following in the footsteps of our hand-built Pulse, Pulse-R provides unrestricted signal dynamics while preserving the intricate low level detail.
















Pre Out Analogue Interconnect
Pre Out Pulse-R internal conductors are also configured differently from the Pulse-R Line Level in order to work effortlessly with and cater for the altering preamplifier output signal. Preamp output is volume controlled, where the signal level is amplified or attenuated as desired, which in turn causes the noise floor to change with it.
















Tonearm Cable
Pulse-R external Tonearm Cable, similar in design to our hand-built Pulse, also enables the miniature cartridge generator to drive the phono input with ease. Pulse-R cable construction facilitates conducting the delicate phono signal as well as accommodating the substantial RIAA equalisation on the LP.

Price 0,85/1,15m

Pulse-R €2550/2800
Pulse-B €950/1050
Pulse-C €300/350




























Internal Conductors
Pulse-X Loudspeaker Cable has a unique internal design and construction.
It utilises a DC zero conductor providing ground reference for the fully shielded and multi-conductor audio signal.
The signal shield is connected at the amplifier output to the DC zero ground for optimised performance.
This arrangement is also applied to bi-wired applications even when using a single connector at the amplifier end.

Price 2/2,5m - €1630/1950


Vertere

If you set the target attribute to "_blank", the link will open in a new browser window or a new tab.