This is a completely new direction in turntables for Galibier, but by no means have we thrown out all we’ve learned through the years.
Here are some key features:
Magnetically tensioned rim drive – fine adjustable tensioning system
Dual, 12″ tonearm capable with revised, sliding armboard architecture based on the Gavia and Stelvio Mk II
4Q controller (evolution of the Stelvio drive)
Modular drive system for ease of service
Gavia TPI© platter standard (Stelvio TPI© optional)
Identical bearing as the Stelvio
Bearing Design
Features and Benefits:
Precision machining to air-bearing tolerances. The .800″ (20mm) diameter shaft means lower deflection and higher precision during the machining process.
Oil reservoir/chamber. A central section of the bearing serves to damp stray bearing vibrations – slight as they may be. Think of a plucked violin string whose maximum travel is at its midpoint.
Massive brass housing machined from 1.5″ (38mm) stock – contributes to vibration and heat dissipation.
Replaceable Delrin thrust plate and hardened steel ball for long life and low noise. None of the “exotics” we’ve tried have convinced us to change this element.
