Here are explanations of the functions of the touch screen:
1) speed of rewind.
2) selection of the diameter of the reel hub: by calculate the length of the band from the diameter of the reel, the TR-1000 slows the speed towards the end (beginning) of the band in order not to damage the tape by putting it at high speed.
3) of speed: Band speed in inches per second.
4) timers / Locators: settings and use area of timers / locators.
5) " Rew + play ", when you buy a recorded tape, it is stored " already read ", which reduces the (Pre-Echoes) printing effects. Before Reading, you have to wrap the tape on an empty reel. This "Rew + play" does it automatically, the TR-1000 rewind the tape, slows down before the beginning, detect the band starts and launches the reading.
" all repeat when reading, when the end of the reel is reached (detection of the band starts), the TR-1000 rewind at the beginning and rereads the tape.
" tape tension automatically activate the tension of the tape, the red light shows whether the TR-1000 is ready for reading or functions.
"Auto play": this function program the TR-1000 so that it starts reading after one of the search operations (Zero Loc, loc, etc.). ).).).).).).).
" last play the tape will be set at the last reading or recording position.
" zero lộc the band will be positioned at location 0:00:00.0
6) Page de maintenance.
7) whether it is an internet connection with the TR-1000 is active, with external maintenance software allowing, for example, to download a new firmware.
8) Whether the remote control is active, any device capable of running an internet explorer (Android Tablet, phone, pc...) can control the TR-1000, no installation software needed...
9) Activate / off the detection of the trigger band, the red light shall indicate if the band is detected.
10) Equalisation NAB ou IEC.
11) High / Low Impedance Selection for each micro entry.
