$44000
Product Features:
Point Array technology (patent pending)
Passive Signal Processor (PSP) technology (patent pending)
Baffle available in either piano black or walnut
Genuine leather cabinet
Outboard passive crossover
Point Array Technology:
Array of full range drivers that emulate a point source.
New level of transparency and imaging for state-of-the-art speaker technology
Innovative technology assures no crossover in critical frequency range of 200 Hz to 5,000 Hz. Enabled by patent pending Active Loading technology:
Active Loading technology is superior to conventional sealed and vented loading methods. A single 8” driver actively loads the multiple radiating drivers so that they are well behaved near their resonant frequency range, allowing them to play down to 100 Hz.
Crossovers inherently impede imaging and transparency since different driver types reproduce different frequencies. This phenomenon is particularly noticeable when a note’s fundamental frequency is played by one driver type below the crossover, and that same note’s harmonics are played by a different driver type above the crossover. When the harmonics change, the character of the note changes. Active Loading enables a very low crossover which is below the critical listening frequency range.
Groundbreaking sonic wave technology emulates a mathematically perfect point source.
Through patent-pending technology:
Drivers arranged tightly in a hemisphere create a point source sonic wave.
Middle drivers are reversed to mitigate non-linear cone movement distortion and control dispersion. Voltage magnitude and timing are uniquely controlled as a function of frequency for each driver position to enhance the sonic wave.
Passive Signal Processor Technology (PSP):
Performs the electrical control functions of both the subwoofer and the full range array utilizing only capacitors, inductors, and resistors.
Enabled by patent pending technology to control the voltage signal to the full range drivers. The PSP offers superior sonics relative to digital solutions.
Product Specs:
Nominal power handling: 300 Watts
Nominal impedance: 8 Ohms
Peak output at 1 meter: 100 decibels
Woofer crossover: 100 hertz
Total cabinet weight: 90 pounds
