Sunday, January 10, 2016

VPI 299D Integrated Tube Amp










































$4000

Limited Edition of only 100 units.

A project between VPI's Harry Weisfeld and VAS' Steven Leung, this tube amplifier sounds great and has been and is currently in use in Mat & Harry's soundrooms! Please be aware, this will be a limited edition product. When it is gone it will be gone forever.

The built in phono stage features a generous gain level of 45db allowing the use of MC and MM cartridges. The preamplifier section provides an additional 12db of gain to give you the great control and dynamics you are looking for!

The VPI 299D Integrated Tube Amp also has 4 independent bias controls for each output tube to give you maximum power and clarity at all times. Each tube's bias is easily adjusted and is displayed on the analog gauge on the front chassis.

The addition of tone controls and headphone output make the VPI 299D Integrated Tube Amp a Modern Classic!


Specifications:

Switchable, Universal Input 120-220V AC, 50-60Hz
Power Output (Standard comes with EL-34 Match-Q. Switchable to KT-88):
2 x 38W / EL-34 (8 Ohms, Ultralinear) (KT-88 /40-Watts). 2 x 20W / EL-34 (8 Ohms, Triode) ( KT-88 /20-Watts).
Tube Complement: 4 x EL-34 ( or KT-88 ), 4 x 12AU7 & 1 x 5AR4
Frequency Response: 9 Hz ~ 52 Hz (-3 dB)
THD: 1% (1kHz)
S/N Ratio: 89 dB
Input Sensitivity: 400 mV, 600 mV ( Pre-in)
Input Impedance: 100-kOhms
Output Impedance: 4 Ohms, 8 Ohms
Classic Design Special-1: Headphone Output
Classic Design Special-2: Tone & Treble Control
MM/MC Phono Total Gain: ~ 45 dB (0.8mV- 5mV Input Range)
Input inpedance: 47.0-K Ohm
Power Consumption: AC-120V - 220V @ 280 Watts
Weight::  58 Pound
Warranty: 90 Day for Tubes & 3 Years For Amplifier
Size W x D x H: 16" x 15" x 7"

If you set the target attribute to "_blank", the link will open in a new browser window or a new tab.