Linnenberg cdp-3E

€4500

Features: - High End CD-PRO2 transport - Precision master crystal oscillator operating all digital circuitry - 24bit/192kHz Burr Brown digital - to - analogue converter - Soft digital filter roll-off for ultra pure high frequencies - True class A, fully discrete analogue circuits with no negative feedback - Ultra short signal path - Balanced analogue outputs with PCB-mounted gold-plated Neutrik XLR sockets - Seperate toroidal transformers for digital and analogue sections - 75 Ohm BNC S/PDIF digital output - BNC digital input for sample/bit rates up to 24bit/192kHz - Elegant DC-mode LED display - Remote control (also for integrated amplifier functions)

	Frequency response (CD-playback) 10Hz - 20kHz +0.1dB -0.5dB Distortion and noise <0.01% 10Hz - 20kHz at 0dB Output level 4V rms balanced Output impedance 470 Ohms Mains voltage 115V, 230V factory set Dimensions (H x W x D) 90 x 440 x 340 mm

NBS UNIVERSAL CD PLAYER

$50000

The NBS Universal CD player is universal in a number of ways:

It can be operated from AC mains anywhere in the world without adjustment.

It delivers both balanced and unbalanced audio outputs capable of driving very long cables if necessary.

It will play almost all audio-only optical disc formats including CD, SACD, DVD-A and ISO9660 CDROM containing .mp3 files, although we don't recommend .mp3 files for high quality.

The player is constructed in two sections of solid ¼" machined aluminum. The lower section contains full NBS power conditioning feeding a universal-input, power factor corrected power supply as well as a mains entrance connector and breaker/power switch. The upper section contains the disc drive, decoding and signal-processing circuits, DACs and output amplifiers. The local operating controls and track display are also in the upper unit.

The two units are separated physically to prevent any possibility of power supply interference to the operating section. However the units are not separable in the interest of avoiding unnecessary external interconnections. No fragile signals such as clocks or data are brought out of the box. Left and Right audio outputs are available balanced on gold-plated XL type connectors, or unbalanced on gold-plated RCA type connectors. The balanced and unbalanced outputs may be used simultaneously.

A major technical feature of the unit is a deep-buffer time-base corrector with an ultra low phase-noise clock. This is effectively like transferring the data to a hard drive, but without the wait. Think of it as an electronic hard drive. This combined with special dual-differential DAC architecture reduces jitter to vanishingly low levels. This is complemented by proprietary servo-controlled I/V converters, low pass filters and output amplifiers.

Specifications:

AC Mains requirement:	85-265VAC 50-60 Hz
HxWxD:	6.25" x 17" x 16" (159mm x 432mm x 406mm)
Weight:	Approximately 72 lbs (32Kg)
Outputs (L&R):	Balanced, Source Z = 100 Ohms, 2Vrms Single-ended, Source Z = 100 Ohms, 2Vrms
Permissible load:	Any
Supplied power cable:	NBS Black Label II+

New Emm Labs products

Esoteric K-03

Audia Flight Strumento No.1 and Strumento No.4