HifiMan Susvara Headphones

EF1000 :

Input Stage : Vacuum Tube SRPP Circuit
Headphone Output for 35Ω Load : 20w. pure Class A
Amplifier Output for 8Ω Load : 50w. pure Class A, 110w. Class A/B
SNR (A weight) : 108dB
Dynamic Range : 111dB

Weight :
Main Unit : 13.45 kg (29.65lb)
Power Supply : 11.2 kg (24.69lb)

Dimensions :
Main Unit : L460x280x170 mm3 (18.11" x 11.02" x 6.69")
Power Supply : L360x 200x170 mm3 (14.17" x 7.87" x 6.69")


Susvara - $6000
Susvara + EF 1000 - $18000

Block Audio Shelf Block Speakers

Danish Audio Design Pre 75, Dac 75 & The Little

Silbatone L-103 inside

Albedo Atesia

Pathos Inpol Heritage

Inpol Heritage is a 80 watt class A integrated amplifier.

Magico M6

$172,000


The new M6 represents the culmination of such efforts and a major advance in loudspeaker design. The most compelling aspect is the six-sided, monocoque enclosure sculpted of ½” carbon fibre, leveraging the latest Aerospace materials and technologies. Similar to the external shell of an F-35 fighter jet, this method of construction increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimise internal standing waves and eliminate external diffractions.

Four massive aluminium billets are meticulously machined to produce a continuously curved exterior with no angles. A thick-machined aluminium inner baffle supports the drivers, while ten aluminium tension rods extend front to back to further stiffen the enclosure and eliminate the possibility of hardware loosening over time.

The new M6 enclosure is completely sealed and, in its finished form, has nearly zero diffractions which allow sound waves propagated by the transducers to disperse naturally without obstruction. This creates a sound-field that replicates that of the recording space and allows the speaker to completely vanish in its environment.

A slight curvature in the machined front baffle enhances the seamless integration of all five drivers and provides an elegant appearance overall. The newly designed 3-point MPOD base provides a perfect coupling platform to the floor and supports the M6 as though it were floating in space.

A new reverse horn-shaped sub-enclosure made of proprietary carbon fibre composite houses the midrange driver and provides an extremely stiff, yet ideally damped, chamber that disperses internal standing waves without the need for copious internal damping materials.


TWEETER highlights

The new M6 also incorporates a more efficient version of the revolutionary tweeter found in the M-Project. A 28mm diamond-coated beryllium diaphragm with optimized geometry, created using state-of-the-art Finite Element Analysis modeling tools, brings the M6's high-frequency reproduction one step closer to perfection. This was achieved by skillfully leveraging beryllium's physical properties, making the tweeter closer to the theoretical ideal without gaining the extra weight normally associated with diamond's specific gravity. This technology allowed Magico to increase the dome diameter to 28mm, improving many aspects of performance and allowing even greater power handling. Combined with a new motor system and new acoustically improved back chamber, the new M6 tweeter has the lowest distortion measurements of any high-frequency transducer.


MIDRANGE highlights

The M6’s new 6” midrange driver features Magico’s superior Graphene-based cone material which is 30% lighter and 300% stiffer than that of its predecessors. This driver utilizes an underhung neodymium-based motor system that leverages an extra-large magnet and a top-stabilizing magnet to ensure a perfectly stabilized magnetic field of 1.7 Tesla in a 15mm air gap, culminating in a pure vented titanium voice coil. The latest 3D laser scanning techniques were used to allow for unparalleled precision in assembly, ensuring optimal behavior in each driver's frequency range while reducing non-pistonic motion and minimizing distortion components. The midrange driver has +/-6mm of stabilized excursion capability at very high sensitivity, enabling 120dB (at one meter) of distortion-free playback in the midrange frequencies.


BASS highlights

Deep, powerful, and accurate bass frequencies result from three newly designed 10.5-inch Magico bass drivers that are produced with advanced manufacturing techniques using a new multi-wall carbon, Nanographene cone. Like the Q7 before it, a colossal effort was made to minimize eddy currents in the iron parts of the underhung motor system of the M6 bass drivers. Eddy currents are created by the voice coil movement and produce chaotic magnetic fields which work against the fixed magnetic field and thus create distortions. The best way to reduce these currents is to saturate the iron as much as possible. When the iron around the coil is totally saturated no induced flux can develop, i.e., no eddy currents. In order to do that a lot of design work, precision machining of the parts, and a huge radical neodymium SD magnet system is required. The results are near 90% saturated iron (industry standard is less than 20%). These are breakthrough characteristics that enable the voice coil to move without any electromagnetic obstructions (the inductance of the woofer is measured at 0.085mH). This powerful magnet structure controls a 5-inch pure titanium voice coil that has 1 inch of linear excursion and produces clean, undistorted sound pressure levels up to 120dB @ 50Hz/1-meter.


All five drivers in the M6 are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that utilizes state-of-the-art components from Mundorf of Germany. The dividing network maximizes frequency bandwidth while preserving phase linearity and minimizing intermodulation distortion. Individual driver performance, and the loudspeaker in its final form, are tested and optimized for acoustical, mechanical, electromagnetic, and thermal behaviors using the latest state-of-the-art Finite Element Analysis simulation testing equipment.



Specifications

Driver complement:

Tweeter: 1.10" Diamond-Coated Beryllium Dome (x1)

Midrange: 6” XG Nanographene Cone (x1)

Bass: 10.5” XG Nanographene Cone (x3)

Measurements:

Sensitivity: 91dB

Impedance: 4 ohms

Frequency Response: 22Hz – 50 kHz

Minimum Recommended power: 30 Watts

Dimensions: 57”H x 26”D x 20”/15”W (143 cm x 66 cm x 51/38cm)

Weight: 390lbs (177Kg)

Trafomatic Audio EOS +

Power output is 150 watt from the KT 150 tubes

Exemplar Audio eXception Phono

$6,950


Due to the extremely small signal produced by a phono cartridge a good phono preamp is one of the most difficult pieces of audio equipment to produce.

We’ve spent 10 years developing and refining our Exception Phono preamp to meet our standards of performance.

Words are inadequate to explain the Exception Phono. Like the rest of our equipment, you have to hear the Exception Phono to fully appreciate what it does.


Key Features

Each unit is hand built in the USA
A low noise level of -75dBu allows the quietest passages of your music to be heard
The low impedance output circuit is designed to drive your cables and isolates the output from the influence of the next stage
All switches are easily accessible
Accommodates both high and low MC output cartridges
Stillpoint Circuit Board Isolators are utilized to mount the amplification board
“Nude” Vishay resistors are used throughout the signal path
Dual mono outboard power supply
Class A, actively loaded, shunt regulated tube RIAA section with passive RIAA
Servo controlled solid state MC section for low noise and large dynamic range without the sonic limitation of transformers
On/Off power switch mounted on front panel of the outboard power supply
Heavy gauge steel enclosure to help isolate external electronic noise from nearby equipment


Specifications

Inputs per Channel
Separate MM and MC inputs
MM/MC switch
MM impedance 47K Ohms
MC Single Ended RCA
Ground lug located on back panel
MC load impedance adjustable via RCA plugs located on back panel


Tube Complement

Two (2) 6C45P and Two (2) 6BZ7 vacuum tubes with high quality ceramic sockets


Power

Ground binding post
Voltage 110/120V AC 60Hz
Optional factory installed 220V or 230/240V AC 50/60Hz
Standard 3 pin IEC power connector
ON/OFF power switch conveniently located on the front panel of the power supply
Separate linear regulators for each channel’s filaments, separate high voltage shunt regulators for each channel’s B+, separate +/- low voltage shunt regulators for each channel’s MC step up stages.


Detailed Specifications

Gain MM input 42dB

Gain MC input 72dB

Noise - 75dBu

Frequency response complies with the original RIAA curve within + or - 0.5 dB

RIAA curve is achieved using a passive filter

1% metal film resistors throughout

Polypropylene and polystyrene capacitors throughout the audio path


Other Features

"Made in the USA" using US and imported parts

Each unit is built by hand

Phono dimensions 16.25" W X 12.75" D X 4.5" H

Phono weight 12 lbs.

Power supply dimensions 8.5” W X 12.5 D X 5” H”

Power supply weight 10 lbs.

Five year limited warranty

Six months warranty on Vacuum Tubes

Ypsilon prototype discrete R2R Dac

Eggleston Andra Viginti

It's called the Viginti (Latin for "twenty") to celebrate the 20th anniversary of the original Andra speaker.

Fundamental MA10 Amplifier

Y 800,000

MA10 is a current mirror design with a single push-pull output stage using bipolar transistors.

Transformer - 1000 VA
20 - 1000 uF capacitors

Power output in 8/4/2 ohms:

Stereo - 40/75/120 watt
Mono - 150/240 watt

Freq. response - 0-2 MHz -1 dB
THD - stereo 0,04% 20 watt, mono 0,07% 75 watt 8 ohm
Input impedance stereo/mono - 20/10k
S/N - 124 dB

Size - 32x15c37 cm
Weight - 18 kg

Boulder 1110 Preamplifier & 1160 Stereo Power Amplifier

1110 Preamplier Features:

Five balanced analog inputs on superior XLR connectors

New, fully-balanced volume control for reduced distortion and step noise

A large, full-color LCD display to clearly indicate all functions and settings

Browser control of all front panel, remote, and naming settings

Comprehensive browser-based setup of preamp preferences

IP control for seamless integration into home automation systems

Ethernet connection for future software updates

Low power-consumption Standby mode

Dimensions: 18” (45.8 cm) W x 5.75” (14.6 cm) H x 16” (40.7 cm) D


U.S. Retail $21.000



1160 Stereo Amplifier Features:

300W per channel of continuous power into any load

Improved ground scheme reduces distortion

Balanced topology from input to output

New protection circuitry monitors line voltage and amplifier operation

Browser control and monitoring of all functions

IP control for use in automated theater or home control systems

Dual, encased, magnetically shielded power transformers, one for each channel

Low power-consumption Standby mode

Dimensions: 18" (45.8 cm) W x 9.5” (24.2 cm) H x 22.75” (57.8 cm) D


U.S. Retail $28.000

Kronos Audio Reference Tube Phono preamplifier

Stark Audio Jane

D'Agostino Progression Mono custom color

Soulution new 3 series products

The new range will include the following: 330 integrated amplifier, 325 preamplifier and 311 stereo amplifier.

You can get to see the new products at the M.O.C Munich, Atrium 4, E107.