Friday, December 31, 2021

Tuesday, December 28, 2021

Flare Audio Zero

 












Zero System 3 price £20000 and £2000 for Zero 8.1 module.

Info


Monday, December 20, 2021

Wednesday, November 10, 2021

Sunday, November 7, 2021

Tuesday, October 26, 2021

Saturday, September 11, 2021

Friday, August 6, 2021

Schnerzinger Essential
















The Schnerzinger Essential is the new and cheapest line from the German manufacturer, it offers a good entry into the world of high-end cables.

Wednesday, July 28, 2021

Saturday, July 24, 2021

Accuphase DP-1000 CD/SACD transport & DC-1000 Dac















The DP-1000 CD/SACD transport & DC-1000 Dac  will be released from Accuphase, which will celebrate its 50th anniversary next year.

Both models are scheduled to go on sale in mid-August 2021.


CD / SACD transport DP-1000

Price : 1,375,000 yen ( tax included )

A large super heavyweight bridge is used for the heavyweight drive mechanism.

An outer rotor type brushless DC motor is newly adopted for the spindle motor.

The damper is a combination of two types with different flexibility to further improve the anti-vibration effect.

The frame structure of the housing has also been reviewed, and the frame, which used to be a combination of two pieces, has been integrated into an L shape.


Dac DC-1000

Price : 1,375,000 yen ( tax included )

Like the DC-950, it uses the "MDS ++ method" by ESS Technology.

As a result of completely reviewing the IV conversion circuit, DAC IC peripheral circuit, and layout, further noise reduction and distortion reduction have been achieved.

The IV conversion circuit is equipped with an original ANCC, and the SN ratio is improved by attenuating after increasing the amplitude.

The filter amplifier circuit has also been improved in performance, the final stage is parallelized to two circuits, and ANCC is adopted for the second stage circuit of the low-pass filter.


Thursday, July 22, 2021

Saturday, June 19, 2021

Sunday, May 23, 2021

X-Factor Reference Dac


















€50000


Digital-to-analog converter. It would seem that the device was already known a little more than 3 decades ago, and since then a lot of them have appeared.

So why another one?

The idea of ​​its creation was born gradually, during many years of working with High End audio. During the operation of DACs of the highest level, a list of requirements, both sound and functional, was gradually formed, which, ideally, such a device should meet. Unfortunately, there were no models on the market that fully met the entire set of these criteria. The current situation is not new (as it once happened with cables), so the idea of ​​creating a more advanced DAC has firmly established itself in our engineering mind.

We have developed the most audiophile design based on solutions that are separately found in equipment from other manufacturers, but are not combined into one device! This applies not only to sound, but also to the functionality of the device.

As a result of long-term research and multiple control listening in the reference path, the designs and the choice of elements for each node were finally worked out and approved.

In addition, our DAC has a modular design, which means it can be upgraded for new digital audio formats.

We would not be so confident in offering our product if we had not substantiated the correctness of the choice for ourselves during numerous listening sessions, including comparative ones with the recognized leaders of the High End audio market.

Structurally, the product consists of two blocks with a total weight of about 100 kg (!): The DAC unit and the power supply unit.

Let's consider their features separately.

In the audiophile environment, the debate about which type of converter is better - one-bit or multi-bit is not abating. For a correct comparison of the advantages and disadvantages of these solutions, they would have to be tested in one device. Otherwise, there are too many variables in the equation.

Until recently, there was no such opportunity, but today it has appeared!

There are two types of conversion at the same time in the device. They are implemented on a delta-sigma chip AK4497 / 4499 and a multi-bit BB1704pk. Moreover, the user can choose between them, literally without interrupting listening. In addition, an automatic mode is possible, when the multi-bit option is in priority (our choice), and when a DSD signal arrives, the device itself will switch to one-bit.

Important: one-bit microcircuits are used separately for each of the channels, and not one for two channels, as is often done.

The features of this DAC include the ability to choose from four coefficients of resampling of the input signal and four options for a digital filter: these are 16 sound options. Moreover, the values ​​of these settings are selected individually for each of the inputs and stored in memory. The digital filter can also be turned off completely. All digital signal operations are handled by a dedicated ADSP 21489 floating point processor. This allows, among other things, to implement filters with arbitrary characteristics, including a custom one, which can be ordered by the client based on his own requirements.

The unit is equipped with a high quality clock generator for external sources. BNC connectors for their connection are also installed on the rear panel. Its significance for music reproduction is very great. Using a single oscillator for the source and DAC improves conversion accuracy and reduces jitter.

There are up to four independent generator outputs in the word clock and master clock formats. Moreover, the device automatically recognizes the format of the input signal and, in accordance with it, selects the optimal clock frequency of the reference generator.

The generator board itself is thermally stabilized. Its current warming up state is indicated on the display of the device.

A group of input connectors is located on the top of the rear panel. Their specific configuration is chosen by the customer. There are two USB inputs and up to 6 XLR-RCA inputs. Moreover, the latter can receive a digital signal, either over one cable (SPDIF format) or over a pair of cables (SDIF format). In the latter case, the signals of the right and left channels are transmitted to the device separately, which provides twice the bandwidth of the transmission channel.

Among well-known audiophile companies, such a solution is used by DCS, WEISS, AURENDER. Professional equipment is equipped with such a protocol very widely. In total, up to three SDIF inputs and up to six SPDIF inputs can be implemented.

All analog circuits at the output of the converter microcircuits are made on discrete elements and operate in deep class "A" in single-cycle switching.

Suffice it to say that the output buffer has a quiescent current of about 300 mA and an output impedance of a few ohms, in the absence of feedback. It is essentially a small power amplifier! Output stage bandwidth - 0 Hz to 50 MHz! At the same time, he demonstrated stability in working with the most "complex" cables.

All capacitors in the power circuits - audiophile series and electrolytic ones - are shunted with high-quality film ones. Resistors in analog circuits are also specialized.

All external switching of the device is made on connectors from Furutech (Japan), and the power connections between the power supply and the DAC are on Russian silver plated multi-pin connectors of the "military" series.

All the main functions of the device are controlled by a multifunctional remote control, made in a solid-milled aluminum case.

At the request of the customer, a renderer with ROON control can be built into this DAC, as well as a volume control unit on discrete resistors. Moreover, this can be done after the purchase of the device by the user.

The case design also deserves a special mention. When creating technology of the reference class, the quality of the case is very important, since the case performs many functions. The first place among them are the functions of protection against vibrations and electromagnetic shielding of the internal blocks of the device.

The cases of both the power supply unit and the DAC itself are made using a combined technology. The inner case, on which all the elements of the device are located, is made of steel, and the outer one is made of 14 mm aluminum sheets. This combination of magnetic and non-magnetic materials allows you to achieve the maximum degree of shielding of the product, both from external interference and nearby components from interference from the DAC. It should be noted that inside the case the analog part is additionally shielded from the digital one.

In addition, the rigid "blank" housing, in combination with specially designed vibration mountings, reliably protects the devices from external vibrations.

The power supply is connected by three power cables to the main unit.

Special attention is paid to cable shielding and vibration protection in the design of the cables - this is a full-fledged component of the system.

In general, power is given special importance in this device, because the output signal is ultimately a "modulated power supply"!

As a result, a design was born, where each DAC node is powered from its own transformer with subsequent stabilization (often double).

The solution, which seems redundant from a purely engineering point of view, nevertheless provides a tangible increase in the subjective sound quality. In addition, all transformers (and there are only eighteen of them) are calculated based on a magnetic flux of 0.6 Tesla (usually this parameter is selected in the 2 Tesla region) - this allows using the core in a lightweight mode, which, in turn, dramatically reduces the level of radiation transformer and its sensitivity to constant voltage in the network, although it leads to an increase in its mass and dimensions. All transformers are carefully shielded!

And like the "icing on the cake" - there are two power supply inputs on the block: for the digital and analogue parts, which allows connecting from different sources / filters and achieving maximum mutual isolation.


Specifications:

Analog outputs: XLR stereo, RCA stereo.

Digital Inputs: 4 x XLR AES / EBU, 2 x SPDIF (Coax), 2 x SDIF, 2 x USB B 2.0.

Supported bit depths and sampling rates: XLR and Coax up to 24 bit / 192 kHz, USB up to 32 bit / 384 kHz, SDIF 24 bit / 384 kHz. DSD: DoP - 64/128/256, Native - 64/128/256/512.

Signal to noise ratio: -119 dB.

Output voltage: 2.1V RMS.

Output impedance RCA / XLR: <10 ohms.

Frequency range: 0 Hz - lower limit. The upper limit is determined by the parameters of the digital signal.

Dynamic range: ≥ 147 dB (-60 dBFS level).

Power supply: AC 220/230240 V, 50/60/400 Hz.

Power consumption in operating mode: no more than 100 VA.

Sunday, April 25, 2021

Thursday, April 15, 2021

Absolare Hybrid Mono Amplifier

 

€66000 /pr

Signature version €85000 /pr