Saturday, August 18, 2012

Sterling Silver Cables - Handmade quality from Norway















RCA cables

Made of sterling silver 0.5mm/dia ​​sterling935 solid wire, placed in a PTFE (teflon) hose. Protective Hose, double decorative sleeve and terminated with high quality plugs from Valab.

The connectors are solder-free on both points. No quality spoiling solder in between here! They are made of rhodium plated brass/copper. The pins are hollow (low mass), and made of rhodium plated tellurium copper.

Standard length is 80cm. Note: Other lengths on request!















XLR Cables

Created by 3 × 035 sterling silver, solid wire conductors. The leads are placed in a protective PTFE hose (teflon), which is fitted in a double decorative sleeve, and terminated with plugs from Valab.

The plugs are made of rhodium plated brass/copper. The pins are hollow (low mass), and made of rhodium plated tellurium copper.

Standard length is 80 cm. Note: Other lengths on request!















Speaker cables

Super speaker cables with 3 × 0.8mm/dia ​​sterling silver conductors. Approximately 1.5 square per terminal.

PTFE Teflon insulation, decorative sleeve. Terminated with copper banana plugs from CMC. (Switzerland).

Standard length is 240 cm. Note: Other lengths on request!















Power cables

Power cable with conductors of 3 * 0.8mm/dia ​​935 sterling silver solid wire. Approximately 1.5 per square pole with earth.

The conductors are insulated in double ptfe (teflon) tubing, the best possible insulative material. The cables are delivered complete with a protective hose and a decorative sleeve.

The cables are quite flexible.

The contacts are lathed of one piece of aluminum with an attached carbon film. They are branded Valab.

The pins are made of rhodium-coated copperalloy.

Standard length is 135cm. Note: Other lengths on request!

Sterling Silver Cables

If you set the target attribute to "_blank", the link will open in a new browser window or a new tab.