Saturday, August 25, 2012

Lenehan Audio ML3 Reference










$15000

Cabinet:
Composite 18 to 36mm HDF laminated to 4mm sprung steel plate. Plus additional 4mm steel plate composite baffle.
Differential Cancellation bracing utilising 25mm hardwood dowel, 13mm steel rod and 18mm Birch Plywood.

Crossover construction:
Full hardwire hand build, all joints are high oressure low contact area cold weld sealed with Teflon amalgamated wrap.
10awg aircored inductors, low tension handwound double stabilised.
Duelund VSF copper foil capacitors in low and high pass crossover filters.
Duelund Carbon Phenolic 15 watt resistors throughout.
Proprietary integration of enclosure substrate steel plate with Crossover network groundplanes.

Tweeter:
1 inch chambered textile dome.

Mid-bass driver:
8 inch Nomex Diaphram.

Wiring:
Handbuilt 25mm and 13mm RibbonTek flat ribbon wire with proprietary dialectric.

Input connection:
Eichmann cablepods.

Frequency response:
25hz to 25khz /- 1.5db (in room).

Sensitivity:
88dB @ 2.83V/m.

Impedence:
8ohms nominal.

Recommended amplifier power:
20-700W.

Cabinet dimensions (HxWxD):
1000 x 244 x 450mm.

Weight (per speaker):
80kg’s (176lbs).

Lenehan

If you set the target attribute to "_blank", the link will open in a new browser window or a new tab.