Friday, February 25, 2011

Kharma Elegance DB9




€27000


Features

The shape of perfection

The shape of the cabinets of the new Elegance series has been unchanged with respect to its predecessor, the Ceramique series, because the shape is fully functional to the way the sound develops from the loudspeakers. This is a result of the unique polygonal shaped cabinet for optimum phase behaviour and minimum group timedelay. Besides, the cabinet is made of 35 mm high density MDF to increase the neutrality of the cabinet and is equipped with advanced acoustic damping materials to absorb the energy in a wide frequency range. The actual size of this new Elegance dB9 is optimized for better performance with respect to its predecessors of the Ceramique series. Moreover the beauty of the design has been improved upon, by redesigning the stand and bottom, the redesign of the front grill and many other small design details.

Living music

One of the many redesigned parts of the Elegance is the grill of the dB9. This new improved grill is made detachable by embedded magnets to really have the freedom to adapt the Elegance dB9 to your own style. With grill the Elegance gives an elegant and luxury feeling, where the dB9 without grill shows the beauty of the new composite drivers without actual showing that a grill could be attached. Therefore the Elegance dB9 can easily blend in both contemporary as well as modern interiors.

Trimmable rings

The Elegance dB9 has the new special feature of trimmable luxury rings around the drivers, which hide the mechanical screws of the driver. The unique feature is that the rings are made magnetic and so can easily be interchanged with other versions of the trimmable rings.

Connectors

New connectors have especially been designed for the Elegance series, which is done for user convenience and for high pressure quality contact. As a result the Kharma Binding Post system for the Elegance (KBPS-EL) can easily give great contact pressure applied by just the twist of a hand.

Internal cabling

The internal wire for the Elegance series is a combination of unique ultra pure copper and silver conductors yielding to a highly musical full balanced sound.

Stand

A new Spike Disk Suspension System stand (SDSS-stand) has especially been developed for the Elegance series. This beautiful new stand is made of composite material with a shiny black finish, which is accentuated by a chrome disk and top cover.


Drivers

· High-frequency: 1 x 1-inch True Beryllium tweeter
· Mid-frequency: 1 x 7-inch Kharma Composite Driver (KCD)
· Low-frequency: 2 x 9-inch Aluminium woofer

The mid range of this speaker is formed by the 7-inch Kharma Composite driver which is equipped with a new cone technology developed by Kharma. It consists of ultra high-tech rocket science/formula 1 based fibres created into a setting with optimised behaviour for the purpose. Finite element analysis with advanced computer systems have leaded to optimised cone-shapes with a near perfect behaviour for a 7-inch driver.


Technical specifications

All new innovations and ideas have resulted in the technical specifications as given below. However, these specifications are still subject to changes, but will give a good indication till further notice.

System: 3-way
RMS power: 250 Watt
Program power: 500 Watt
Frequency range: 26 Hz – 30 kHz
Nominal impedance: 4 Ohm
Efficiency 2.83V/1m: 89 dB
Maximum SPL: 113 dB

If you set the target attribute to "_blank", the link will open in a new browser window or a new tab.